carvox alarm cant get it to autostart

Home / the12volt's Install Bay / Car Security and Convenience / carvox alarm cant get it to autostart (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

vishal0587

Member - Posts: 3

Joined: October 20, 2005

Location: Canada

Posted: October 20, 2005 at 9:27 PM / IP Logged

i put the tech on the coil and it wont work

it keeps cranking the starter

can some 1 help me plz

Back to Top

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: October 20, 2005 at 9:59 PM / IP Logged

What Year, Make, model of car do you have?

Be careful whose advice you buy, but be patient with those who supply it. carvox alarm cant get it to autostart -- posted image.

Back to Top

vishal0587

Member - Posts: 3

Joined: October 20, 2005

Location: Canada

Posted: October 20, 2005 at 10:05 PM / IP Logged

1991 nissan Maxima

Back to Top

edith

Member - Posts: 19

Joined: October 15, 2005

Location: Canada

Posted: October 21, 2005 at 5:43 AM / IP Logged

vishal0587 wrote:

i put the tech on the coil and it wont work

it keeps cranking the starter

can some 1 help me plz

hi...is that the remote starter you have

http:///.ca/dll?ViewItem&category=94832&item=5808451732

because i have the same problem?

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 21, 2005 at 8:39 AM / IP Logged

Check the PURPLE / White wire for programming

Also you may have a Cold Start wire

Cold Start Wire- GREEN/ RED Or BLACK/ GREEN At Ignition Switch Harness.

Tach Signal

GREEN/ BLACK/ SILVER

2ND OF 4 CONNECTORS AT ECCS, PIN 7 *

* Electronic Concentrated Control System (ECCS) Module Located Above Gas Pedal, Behind Console. Tach Wire Sometimes Found As BLUE At Pin #7 At ECCS

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

vishal0587

Member - Posts: 3

Joined: October 20, 2005

Location: Canada

Posted: October 21, 2005 at 10:29 AM / IP Logged

i got it to work the Tech wire is 2 small it is picking up all the High-Voltage sensing what i did it work fine nowi put 8g wire form the coil run it to the main unit cut the tech wire 1f long form the main unit and join it to the 8g wire.

Back to Top

edith

Member - Posts: 19

Joined: October 15, 2005

Location: Canada

Posted: October 21, 2005 at 11:39 AM / IP Logged

vishal0587 wrote:

i got it to work the Tech wire is 2 small it is picking up all the High-Voltage sensing what i did it work fine nowi put 8g wire form the coil run it to the main unit cut the tech wire 1f long form the main unit and join it to the 8g wire.

hi is that work ok now?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

carvox alarm cant get it to autostart

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.