the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 Chevy Venture Remote Starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
campuschill 
Member - Posts: 13
Member spacespace
Joined: October 25, 2005
Location: United States
Posted: November 21, 2005 at 3:02 PM / IP Logged  
I have installed a CODE ALARM CSI-400 on a 2000 Chevy Venture. I have not installed the Pass III Key bypass system yet, but would like to check if my installation works at this point. Should i just insert the ignition key in the cylinder and try the remote start or do i have to turn the key to ON position to check the remote start. Thanks.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: November 21, 2005 at 3:11 PM / IP Logged  
just slide the key in but dont turn it ... if all works good then you just have to deal with the PK 3 end of things.....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
campuschill 
Member - Posts: 13
Member spacespace
Joined: October 25, 2005
Location: United States
Posted: November 21, 2005 at 8:50 PM / IP Logged  
Thanks Kevin...My current set-up does not work. The CSI-400 has a tachless mode, can i try at this mode, while removing the connection to the tach wire from the main module.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer