99 JimmyAT, remote start, PL II

Home / the12volt's Install Bay / Car Security and Convenience / 99 JimmyAT, remote start, PL II (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wayne3

Member - Posts: 10

Joined: October 16, 2005

Location: Canada

Posted: October 26, 2005 at 10:06 AM / IP Logged

I have installed a Jensen JKRS3 remote start with a passlock II bypass. Everything works ,ie doorlock, unlock,start,however I cannot get the factory alarm to arm via the remote start transmiter.I've searched the wiring diagrams here but can only find the alarm disarm wire.The alarm will set if I use the factory transmiter.

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 26, 2005 at 10:42 AM / IP Logged

Does't it ARM at the Door Switch? I don't remember a way to ARM without the Factory Transmitter or at the Door Switch.

You may have to ARM at the Door when you want it to work & DisArm with your Jensen, if you want to carry one Transmitter

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 26, 2005 at 10:51 AM / IP Logged

Use a rearm pulse to go to the tan wire in the black plug at the BCM and you will have arm, as well it will turn the radio off when the starter times out.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Back to Top

wayne3

Member - Posts: 10

Joined: October 16, 2005

Location: Canada

Posted: October 27, 2005 at 9:01 AM / IP Logged

Thanks to Shaun Murely,Install manager, Visions Electronics for the problem fix. Everything works GREAT.Thanks again.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 JimmyAT, remote start, PL II

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.