Bracing for Large Box

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Bracing for Large Box (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mjmauto

Member - Posts: 43

Joined: June 26, 2005

Location: Arizona, United States

Posted: October 27, 2005 at 9:57 PM / IP Logged

I am building a large ported enclosure out of MDF for four M3 memphis 12 inch subs . The box is being built to memphis specs, the only question I have is about bracing the inside of the box. What is the best way to do this ? Any help is greatly appreciated ?

Back to Top

Em12986

Copper - Posts: 55

Joined: August 09, 2005

Location: United States

Posted: October 28, 2005 at 12:48 PM / IP Logged

If you build the box right. Like wood gule then temp nail and scerw it together. You shouldnt have to brace it. I didnt on for 4 12in eclispe.But if you do you got to think that the braces take away airspace( use the corner of a board or 2x4 and cut it at a 45) . Just start with all the sides and do the top and bottom last.

Back to Top

mjmauto

Member - Posts: 43

Joined: June 26, 2005

Location: Arizona, United States

Posted: October 28, 2005 at 1:25 PM / IP Logged

thanks for the help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bracing for Large Box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.