rover 214sli central locking

Home / the12volt's Install Bay / Car Security and Convenience / rover 214sli central locking (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lugz

Member - Posts: 4

Joined: October 29, 2005

Location: United Kingdom

Posted: October 29, 2005 at 7:24 AM / IP Logged

this probabaly wont get a reply as im english, but i have a rover214 sli with central locking. there has been an aftermarket alarm on the car which was taken off when i bought it. as the central locking is not working, the control unit looks good (although not changed or tested) the fuse is not blown, and all the locks are maintained and working, i think that when someone has installed the alarm that was on it they had it hooked up to the central locking so you could use the alarm fob to unlcok/lock the car.

is there anywhere on this car which you would typically cut and wire and join it to an alarm for this reason? i believe that someone has done this and not reconnected the wires afterwards.

if not this does anyone have another suggestion>?

paul;

Evolution-UK

Copper - Posts: 192

Joined: June 19, 2005

Location: United Kingdom

Posted: October 29, 2005 at 10:46 AM / IP Logged

What year is the vehicle

lugz

Member - Posts: 4

Joined: October 29, 2005

Location: United Kingdom

Posted: October 30, 2005 at 7:12 AM / IP Logged

it is a 1992 k reg 1.4 spi DOHC (honda engine)

Evolution-UK

Copper - Posts: 192

Joined: June 19, 2005

Location: United Kingdom

Posted: October 30, 2005 at 7:27 AM / IP Logged

I wouldnt have thought that he would have cut the wires. This car needs a door motor to be installed in the drvers door so that the alarm could control the central locking.

Was the CDL module located in the drivers door?

lugz

Member - Posts: 4

Joined: October 29, 2005

Location: United Kingdom

Posted: October 31, 2005 at 2:55 AM / IP Logged

ill look today, standby

lugz

Member - Posts: 4

Joined: October 29, 2005

Location: United Kingdom

Posted: November 03, 2005 at 4:03 PM / IP Logged

no the control module is in the passenger door. there were some wires chopped inside the drivers door but ive reconnected them, still no avail. i think they may be the wrong way round, thats my next job once it stop raining.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

rover 214sli central locking

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.