Latched or Constant?

Home / the12volt's Install Bay / Relays / Latched or Constant? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fozzz

Member - Posts: 10

Joined: October 30, 2005

Location: Canada

Posted: October 30, 2005 at 8:35 PM / IP Logged

Hi there. This will be my first post on this forum so try not to laugh too hard if my question is very basic. I'm sure I'll catch on pretty quick.

I am looking to put a motorized amp rack in my car. I'm using an alarm trigger to operate the actuator. By looking through this web site I have found that my two best options would be either the Latched On/Off Output Using a Single Momentary Pulse or a Momentary to constant type. The Constant type seems pretty straight forward. But I dont totally understand the Latched type. I dont know where the input for the circut should be (I have seen the diagram there is no mention of the input pulse). There is the drawing of the switch but Im not sure if it is a switch! Also would this latched circut be just for the "up" motion? Which would mean I would need a second latch circut for the "down" motion?

My amp rack will use limit switches to stop the racks motion. And from what I can understand, the latched system gives you the control of not necessarilly needing the limit switch because you can stop it with another touch of your remote button.

Am I on the right track????

any tips of suggestions?

Back to Top

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: October 30, 2005 at 9:08 PM / IP Logged

yes you will only be able to go one way because you need to revese polarity to get it to retract. do you need to use the alarm or just want to? i would use a relay setup as done in a power window curcuit. maybe someone else out here has a better idea but if you need to know how to use my idea i will send you a schematic. lol

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Latched or Constant?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.