the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Starting Problem

Home / the12volt's Install Bay / Car Security and Convenience / Starting Problem (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
smrdr 
Member - Posts: 27
Member spacespace
Joined: November 26, 2002
Location: United States
Posted: December 11, 2002 at 9:03 PM / IP Logged  

I have a Stingpro DX-710 in my Pontiac Grand Prix GT and I'm having a problem with the car starting. Some times the car will start fine and then the starter will engage but then shut right off with out cranking the car. I did ajust the cranking time but that did not solve the problem just cranked the car over longer when it does deside to work. Any ideas what might be going on?

securinu 
Silver - Posts: 772
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 15, 2002
Location: United States
Posted: December 11, 2002 at 9:34 PM / IP Logged  
check you passlock now that it is cold resistance values tend to change
smrdr 
Member - Posts: 27
Member spacespace
Joined: November 26, 2002
Location: United States
Posted: December 11, 2002 at 9:46 PM / IP Logged  
My car doesnt have passlock.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: December 11, 2002 at 9:56 PM / IP Logged  
What is the year of the Grand Prix ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
smrdr 
Member - Posts: 27
Member spacespace
Joined: November 26, 2002
Location: United States
Posted: December 11, 2002 at 10:00 PM / IP Logged  
1997
RufNUSD 
Copper - Posts: 184
Copper spacespace
Joined: December 10, 2002
Location: United States
Posted: December 11, 2002 at 10:58 PM / IP Logged  
Bad Ignition connections or possible bad isolation of mulitple relays performing like tasks? Testing with your meter should yield results if you installed this yourself.
Someone pass me that bottle.
Sound Pressure 
Silver - Posts: 711
Silver spacespace
Joined: March 09, 2002
Location: United States
Posted: December 11, 2002 at 11:59 PM / IP Logged  
Did you check to make sure that you have the correct tach signal or correct injector wire/program on either or?
Sound Pressure
You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!
smrdr 
Member - Posts: 27
Member spacespace
Joined: November 26, 2002
Location: United States
Posted: December 12, 2002 at 11:24 AM / IP Logged  
I think the tach is ok, I did the tach self test in the directions and it can back ok . As for the contections I think they could be better but I went to radio shack and couldnt find connectors that would connect the big wires in the cars system to the smaller remote starter wires. Does anyone know a web site where I could get some good connectors that are good for the job, I live in the sticks and the only installer arround here wont sell his stuff because he wants to put the stuff in for a large fee.
eugenenet 
Member - Posts: 5
Member spacespace
Joined: December 26, 2002
Location: United States
Posted: December 26, 2002 at 9:36 PM / IP Logged  
smrtdr, help, i have 1999 pont grand prix - i am trying to find tach wire .........
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: December 28, 2002 at 11:09 AM / IP Logged  

Solder the connections.... don't use the T-taps for these connections. They are important adn you don't want them to fail you or become loose.

TACHOMETER------------white--------------pin 8, conn. 2 @ PCM ( The PCM (Powertrain Control Module) is in the air cleaner assembly.)

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer