Wire Info Request - Nissan Pulsar GTI-R

Please, and diagram for wiring the relay for the central locking, using a concept 650, i belive it is a single wire setup

year?

muppet, which wiring diag do i need then for controlling the motor to lock/unlock the doors?

Heres how to solve the problem. Pulsars have a door lock module left side of steering column. Lock and unlock drivers door manualy and listen its easy to find.Take a test light and probe the wires at the module they are - pulse but it will only unlock and lock at the passenger door. Put a two wire acuator install it in the drivers assuming you can install it  run the two wires to the door lock module,and when pulsing the locks find the ouput for the passenger doors lock and unlock + output and connect  the acuator wires to them,this will work like factory systems so when you lock and unlock at the factory switch all doors willwork