'99 Explorer hood pin

Home / the12volt's Install Bay / Car Security and Convenience / '99 Explorer hood pin (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mrdakota

Member - Posts: 7

Joined: October 26, 2005

Location: United States

Posted: November 06, 2005 at 5:14 PM / IP Logged

I found the hood pin wire(per wiring diagram) but could not see a hood switch device? [tan/ light green(-)]

No voltage on it / closed or open just a constant 100ohms either open or closed to chassis ground and it runs into the key switch?

I hate the tought of using the pin switch that comes with the Valet 562T.

Back to Top

jvivek

Member - Posts: 11

Joined: October 19, 2005

Posted: November 06, 2005 at 7:04 PM / IP Logged

I have a 2000 ford explorer and I dont even have a hood switch, if you happen to have a light in the hood, which I dont, it is a mercury controlled switch, I would rather use the hood pin.

Back to Top

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: November 06, 2005 at 9:39 PM / IP Logged

it prolly doesnt have one unless u have a factory alarm system

Where theres is a wire there's a way.

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 09, 2005 at 7:02 AM / IP Logged

add one from scratch....best way to go.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'99 Explorer hood pin

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.