where to run power thru firewall

Home / the12volt's Install Bay / Car Audio / where to run power thru firewall (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

colaroaster

Copper - Posts: 53

Joined: May 17, 2003

Location: United States

Posted: November 07, 2005 at 3:40 PM / IP Logged

i've looked and i can't seem too find a factory grommet/hole too run my 4ga power wire thru. can anyone tell me where too find a place in the firewall or will i just need too drill my own hole? it's a 93 jeep cherokee. thanks

Back to Top

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: November 07, 2005 at 5:33 PM / IP Logged

if it is an automatic tranny then there should be a clutch plate right to the left of the brake mount. it should be held in with 2 bolts. take it out and drill the hole and put it back in.

Back to Top

youngone

Silver - Posts: 269

Joined: September 28, 2005

Location: United States

Posted: November 07, 2005 at 8:15 PM / IP Logged

sounds like a plan where to run power thru firewall - Last Post -- posted image.

Want to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

Back to Top

blackcr125

Member - Posts: 8

Joined: November 07, 2005

Location: United States

Posted: November 07, 2005 at 9:46 PM / IP Logged

No need to drill or unbolt anything. I had a 93' Cherokee. Say your facing the front of the car, there will be a hole for the main harness on the far right side of the firewall. If you can't find it that way, then go in your drivers side, take off the grey panel that covers the fuse panel and hood release assembly, look up and to the left on the firewall and you should see it.

Back to Top

colaroaster

Copper - Posts: 53

Joined: May 17, 2003

Location: United States

Posted: November 08, 2005 at 11:33 PM / IP Logged

thanks for all the help, you guys rock!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

where to run power thru firewall

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.