the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Making a Sub box Question


Post ReplyPost New Topic
< Prev Topic Next Topic >
tazmn23 
Member - Posts: 5
Member spacespace
Joined: November 09, 2005
Posted: November 09, 2005 at 7:53 AM / IP Logged  

I decided to make a sub box with all fiberglass.  I only have one question though.  I am going to put 1 10" sub in box molded to the side of my trunk like I see others doing, but my wuestion is.... How would we support it to the side of the trunk so it does not tip over/roll around when taking corners?

Thanks.

Tim

old49er 
Member - Posts: 6
Member spacespace
Joined: January 12, 2005
Location: United States
Posted: November 09, 2005 at 8:42 AM / IP Logged  

well you can drill a hole and mount to the body  

hobobasher 
Copper - Posts: 66
Copper spacespace
Joined: September 23, 2005
Location: Rhode Island, United States
Posted: November 09, 2005 at 2:20 PM / IP Logged  
dont secure it to the body unless you want a hold into your floor and risk puntuing your fuel tank or having a hole in your quater panel i wouldend recomend that so the panel you used to make a mold with screw it to if you have just carpet which alot of car companies like doing i would then say go from behind the carpet put a fasner into the enclosure then seal it up dont use a huge fasner i dont think you want it touchign your sub but yeah thats your best bet
hobobasher 
Copper - Posts: 66
Copper spacespace
Joined: September 23, 2005
Location: Rhode Island, United States
Posted: November 09, 2005 at 2:21 PM / IP Logged  
wow sorry about the double post sorry bout the typos
hobobasher 
Copper - Posts: 66
Copper spacespace
Joined: September 23, 2005
Location: Rhode Island, United States
Posted: November 09, 2005 at 8:38 PM / IP Logged  

yeah definatly thats accually a good idea nice job


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, November 26, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer