2002 chevy envoy remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2002 chevy envoy remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

elvis233

Member - Posts: 16

Joined: December 01, 2002

Location: United States

Posted: November 09, 2005 at 8:38 AM / IP Logged

just installed a disigntec remote starter in my 2002 chevy envoy but it's not working.. i think the problem is caused by the factory alarm system because the remote start is sending power to the starter wire when activated.. but the starter doesnt crank over,, the wire diagram i have says the alarm disable wire is located inside the drivers door at module,, but i can't find any module inside drivers door.. can somebody please help me !!

stang351w

Silver - Posts: 350

Joined: August 20, 2003

Location: Canada

Posted: November 09, 2005 at 8:44 AM / IP Logged

it wouldn't be hte factory alarm doing that..i beleive the factory alarm in those cut off the fuel pump. sounds to me like you don't have the starter wire from the unit onthe right starter wire in the vehicle. if i remember right it's the large yellow wire in the wire harness...when you go to remote start the vehicle does the heater come on or is it all dead?

Tri County KustomZ

certified installer

elvis233

Member - Posts: 16

Joined: December 01, 2002

Location: United States

Posted: November 09, 2005 at 9:03 AM / IP Logged

i have it to the correct wire (yellow wire) i also checked it with a test lite and it lites up when in start postion only

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: November 09, 2005 at 9:30 AM / IP Logged

elvis233 wrote:

i have it to the correct wire (yellow wire) i also checked it with a test lite and it lites up when in start postion only

Would that be in the CRANK Position? With the Key?

What ByPASS Unit are you using??

Don't Learn from Others Mistakes

You Might Be the One That Knows.

elvis233

Member - Posts: 16

Joined: December 01, 2002

Location: United States

Posted: November 09, 2005 at 9:59 AM / IP Logged

yes.. crank position. sorry

not using a bypass.. what do i need to bypass

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: November 09, 2005 at 10:54 AM / IP Logged

DEI part # 555L to bypass the passlock2 system in that vehicle.

Gus

Wherever I go, that is where I end up......

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 09, 2005 at 10:54 AM / IP Logged

555L or GMBP or 457G

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

davedyer79

Copper - Posts: 178

Joined: February 18, 2004

Location: United States

Posted: November 09, 2005 at 4:12 PM / IP Logged

You actually need to bypass two seperate features in that vehicle. The doorlocks are "multi-plexing", meaning they talk back and forth to several computers for lock/unlock features. It is not the simple two wire +/- or reverse ground. The Envoy also has a Passlock interface, or factory anti-theft system. A good bypass like kgerry mentioned is the GMDL-BP, all in one bypass. This one bypass will do both. Very simple installation and fairly simple programming and you will be finished. Good luck. I get these from my dealer, should be able to get them off the net. Here is a link to one site, never ordered from them before so cant verify anything.

http://www.audiooutfitter.com/store/GMDLBP.html

davedyer79

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: November 09, 2005 at 4:29 PM / IP Logged

Didn't say that he needed doorlock control......

Gus

Wherever I go, that is where I end up......

elvis233

Member - Posts: 16

Joined: December 01, 2002

Location: United States

Posted: November 10, 2005 at 7:08 AM / IP Logged

just remote start.. no door locks

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.