02 dodge ram, keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / 02 dodge ram, keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

eeh1025

Copper - Posts: 113

Joined: November 26, 2002

Location: United States

Posted: November 10, 2005 at 2:29 PM / IP Logged

Hey there i have an 02 dodge ram, im hooking up a crimestopper dc2004 II alarm, i at the point of the keyless entry, i have the 820ohm and 330ohm resistor the problem is i dont know what wire to hook them to, also how do you test a negitive trigger what reading should i get out of it? thanks

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: November 10, 2005 at 2:47 PM / IP Logged

If you have ON-Board Relays:

Hook one side of 820 Resistor to LOCK Wire

Hook one side of 220 Resistor to UNLock Wire

Then Hook BOTH other ends of Resistors to the WHITE / Dk. Green Wire in Vehicle.

TEST

DONE

Don't Learn from Others Mistakes

You Might Be the One That Knows.

eeh1025

Copper - Posts: 113

Joined: November 26, 2002

Location: United States

Posted: November 10, 2005 at 2:49 PM / IP Logged

im going to try that now

thanks

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: November 10, 2005 at 2:59 PM / IP Logged

the lock needs a 867 ohm and the unlock needs a 364 ohm. the wire is wht/grn in the drivers kick panel. to check neg. pulse use a dmm pos probe to a 12vdc feed and the neg. probe to wirer being tested you will see meter increase in voltage. if not you are testing a pos. pulse.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

eeh1025

Copper - Posts: 113

Joined: November 26, 2002

Location: United States

Posted: November 10, 2005 at 3:04 PM / IP Logged

hey there i got the 330ohm unlock to work but the lock dont go down, now i couldnt find a 820ohm resistor so i hooked up 2 of them up in parrel a 330 and a 470 could that be the reason. do i need to hook them up in series

thanks

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: November 10, 2005 at 3:14 PM / IP Logged

Needs to be SERIES......One connected to the other

Don't Learn from Others Mistakes

You Might Be the One That Knows.

eeh1025

Copper - Posts: 113

Joined: November 26, 2002

Location: United States

Posted: November 10, 2005 at 4:02 PM / IP Logged

yo you the man it worked, thanks alot guys

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02 dodge ram, keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.