Neutral Safety Switch, 89 Mustang

Home / the12volt's Install Bay / Car Security and Convenience / Neutral Safety Switch, 89 Mustang (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Nebey

Member - Posts: 6

Joined: September 26, 2003

Location: Canada

Posted: November 13, 2005 at 3:36 PM / IP Logged

Hey so I am installing a remote starter in my 89 mustang, I have got it all wired in, everything works good, except I havn't figured out what to do about the neutral safety switch. I think I found it, has 2 sets of wires going into it, its white plastic, and seems to move as push in the clutch. do I connect 2 wires together? if so which ones? so I somehow mechanically close the switch? remove it and relocate it?

IThanks for your time

Mike

Nebey

Member - Posts: 6

Joined: September 26, 2003

Location: Canada

Posted: November 13, 2005 at 3:53 PM / IP Logged

ahh ok, maybe I was miss-reading the printout.... ok so the clutch switch

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 13, 2005 at 3:57 PM / IP Logged

What are you installing (make and model)

Nebey

Member - Posts: 6

Joined: September 26, 2003

Location: Canada

Posted: November 13, 2005 at 5:12 PM / IP Logged

I am putting a remote start into my 1989 Ford Mustang, with a manual transmission. I want the car to be ablt to start without having to push the clutch in.

The remote start is by Polar Start I do believe... something like that anyways... I have looked at it so much, I have fogotten...

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 13, 2005 at 7:41 PM / IP Logged

just bypass the clutch with a relay

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 13, 2005 at 9:57 PM / IP Logged

KarTuneMan wrote:

What are you installing (make and model)

What type of R/S......?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Neutral Safety Switch, 89 Mustang

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.