15inch fiberglass box for a Mustang
Home /
the12volt's Install Bay /
Fiberglass, Fabrication, and Interiors / 15inch fiberglass box for a Mustang (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: November 14, 2005 at 11:56 PM / IP Logged
The mold was made and built the ring and placed it where I wanted it at.
stertched the fabric and applied the resin
The first two layers of mat
After seven layers of mat and sanded
Not the sub that is going to be used. Bondo and finished for the customer. He wanted to do the install himself I just made the box for him. I do know that the sub will be a kicker compvr
Posted: November 15, 2005 at 3:12 AM / IP Logged
Posted: November 15, 2005 at 8:25 AM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
