remote start not working

Home / the12volt's Install Bay / Car Security and Convenience / remote start not working (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

radioflyer

Copper - Posts: 63

Joined: November 14, 2005

Location: United States

Posted: November 15, 2005 at 10:45 AM / IP Logged

I had a prestige alarm system with remote start installed on my 97 silverado. I had to disconnect the battery while working on it last week and now the remote start. The remote door locks and alarm work but when I use the remote start, all the lights flash but no start.

any suggestions?

thanks

you can never have too much of a good thing

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: November 15, 2005 at 11:21 AM / IP Logged

Have you checked the fuses to the remote start relays? If they are fused separately from the brain and one or both of them blow, then the parking lights and the alarm and keyless functions might still work but the remote starter won't be able to power up the ignition harness.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start not working

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.