2002 chevy van

Home / the12volt's Install Bay / Car Security and Convenience / 2002 chevy van (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jimmythegreat1

Member - Posts: 35

Joined: November 20, 2002

Location: United States

Posted: December 13, 2002 at 9:36 AM / IP Logged

Hey guys, and gals if any. I am doing a prestige 785 in an astro van full size, custom I will be doing the remote start also the van already has keyless entry can I tap into these somehow? let me know will ya. also another diagram would be nice I also will be using the 55L for the pass lock, question how do I know that the vehicle has the pass lock the key looks normal with no chip in it.

jimmythegreat1

Member - Posts: 35

Joined: November 20, 2002

Location: United States

Posted: December 13, 2002 at 9:58 AM / IP Logged

The lady wants the drivers door to unlock when i hit unlock but the other doors to open with like a 2cond option button also the rear door to unlock seperate also.

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: December 13, 2002 at 10:45 AM / IP Logged

Chevrolet

Astro Van

1996-2002

Remote Starter Wiring Colors and Notes
Function		Vehicle Color	Location
Start:		YELLOW	IGNITION SWITCH HARNESS **
Ignition #1:		PINK	IGNITION SWITCH HARNESS
Ignition #2:		WHITE	IGNITION SWITCH HARNESS
Ignition #3:		N/A	IGNITION SWITCH HARNESS
Accessory:		ORANGE	IGNITION SWITCH HARNESS
Brake Light:		WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:		WHITE	AT IGNITION COIL *
Parking Lights:		BROWN (+)	AT HEADLIGHT SWITCH
Headlights:		YELLOW (+)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:		N/A	IN SCHEMATICS
OEM Alarm Arm:		N/A	NO OEM ALARM PRESENT
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Ignition Coil Located On Top Of Engine Behind Generator.** 1998+ Vehicles Are Equipped With GM's PASSLOCK II Anti-Theft System; See Note #113 - Bypassing GM's PASSLOCK II Passive Theft System Diagram.

Chevrolet

Astro Van

1996-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		RED (2)	IGNITION SWITCH HARNESS
Starter Kill:		YELLOW	IGNITION SWITCH HARNESS **
Ignition +12 Volts:		PINK	IGNITION SWITCH HARNESS
Dome Lights/Superv:		PURPLE (-)	AT ANY PIN SWITCH ****
OEM Horn:		BLACK (-)	STEERING COLUMN HARNESS
Power Lock:		L BLUE	DRIVER'S KICK PANEL*****
Power Unlock:		WHITE	DRIVER'S KICK PANEL*****
Trunk Release:		L GREEN (-)	AT REAR WINDOW RELEASE SWITCH
Alarm Input Wire:		PURPLE (-)	AT ANY PIN SWITCH ****
Notes:	** WHITE (-) At Courtesy Light Can Also Be Used For Door Trigger.*** See Note #202 - Positive Pulse Door Lock Diagram.

The driver's door unlock first, you will have to cut the driver door motor unlock wire and hook up a relay to it. Then the connect the door lock and unlock wire from the switch to the alarm system with positive switching. Have fun

jimmythegreat1

Member - Posts: 35

Joined: November 20, 2002

Location: United States

Posted: December 13, 2002 at 2:15 PM / IP Logged

I really need to know how to hook up the door locks using a 785 prestige alarm people can ya help...

The Van has Keyless entry and you must hit the unlock twice to open all of the doors once for the drivers door are there relays and were and hell how do i hook into them?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 13, 2002 at 4:58 PM / IP Logged

The RED unlock wire goes to the Driver's MOTOR wire ( TAN at the driver's kick panel ) and this connection is a + trigger .
Now the second unlock wire from the 785 RED / BLACK go to the WHITE wire in the driver's kick panel .
The lock on the 785 GREEN goes to the LIGHT BLUE wire on the van.
Check this link out http://www.velocitymotorsport.com/install_notes/Converting_Outputs.jpg and use the NEGATIVE------>POSITIVE OUTPUT diagram.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

dcash18

Member - Posts: 38

Joined: November 22, 2002

Location: United States

Posted: December 13, 2002 at 5:39 PM / IP Logged

There is not a chip in the key. This car uses a resistance type bypass. The 555L will work.

jimmythegreat1

Member - Posts: 35

Joined: November 20, 2002

Location: United States

Posted: December 16, 2002 at 9:32 AM / IP Logged

Jeff were are these wires located at and do I need relays? or does the 785 handle this for me?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 16, 2002 at 12:04 PM / IP Logged

All these wires can be found at the driver's kick panel. You will need a relay for the RED unlock wire so you can convert the current from a (-) to a (+) in order to actuate the priority door lock.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

jimmythegreat1

Member - Posts: 35

Joined: November 20, 2002

Location: United States

Posted: December 16, 2002 at 12:15 PM / IP Logged

So Jeff you are saying this is sorta like a toyota or a nissan the groung thrown by the alarm will lock and unlock the doors?

jimmythegreat1

Member - Posts: 35

Joined: November 20, 2002

Location: United States

Posted: December 16, 2002 at 12:22 PM / IP Logged

oops ground not groung

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.