the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 armada nav video input ?


Post ReplyPost New Topic
< Prev Topic Next Topic >
jasson327 
Member - Posts: 3
Member spacespace
Joined: October 18, 2005
Location: United States
Posted: November 17, 2005 at 5:24 PM / IP Logged  

Has anyone added video input to the factory nav system or is it possible.  Nissan Armada 2005

gotskidmarks
Asmodeus 
Silver - Posts: 393
Silver spacespace
Joined: September 02, 2004
Location: United States
Posted: November 21, 2005 at 11:11 AM / IP Logged  

Have not done it in this specific vehicle....So I cannot offer more information than this...

Peripheral makes a unit to integrate video into the Nav of the Armada...

PAC also has the VCI-X which is supposed to work for the Armada as well....

I have not used these units before, I cannot say that they will work but this is what I found...

2005 armada nav video input ? -- posted image.
Making the World A Louder Place
Ickster40 
Member - Posts: 32
Member spacespace
Joined: October 01, 2002
Location: United States
Posted: November 25, 2005 at 10:11 PM / IP Logged  
i've done several 05 qx56 , there the same nav, use the pac vci-x or navtv converter.
nissandy 
Member - Posts: 4
Member spacespace
Joined: January 31, 2006
Location: United States
Posted: January 31, 2006 at 12:11 PM / IP Logged  
Hi,
I recently tried to add a backup camera to my ’05 Nissan Pathfinder’s Nav unit to no success.
I used the Nav interface module from GNETCANADA. The manual specifically stated that I was supposed to connect the OEM Nissan harness to the Nav Unit where the DVD is inserted to. I checked that spot located under the passenger’s seat and did not find a matching molex RGB connector to the one supplied by Nissan. My installer and I decided to look behind the LCD screen and there we found two (2) molex connectors that matched the RGB molex connector on the wiring harness supplied by GNET/Nissan. We tried both connectors to no success. One of the connectors (not directly connected to the screen) that fitted did not seem to have the same amount of wires as the wiring harness had. The other connector found directly behind the LCD screen seemed like the correct one with same amount of wires. So I guess my question to you is, which one do you connect into? The one directly behind the screen, under the screen, or elsewhere I haven’t found yet? All other connections seem to be done correctly.
Thanks for your help!
Andy
domtvandnav2go 
Member - Posts: 3
Member spacespace
Joined: February 02, 2006
Location: United States
Posted: February 02, 2006 at 6:48 PM / IP Logged  

Hi

We have the interface for this car and many other. The Plug and Play unit plug in behind the LCD screen. Feel free to visit us at www.TVandNav2Go.com

Thanks Dominic 


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer