the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 camry alarm/ remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2001 camry alarm/ remote start (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: November 22, 2005 at 5:16 PM / IP Logged  
What diodes would I need to install the alarm/remote starter.  If I have 2 ignition wires and 1 ignition wire from starter unit how do I connect them both to the alarm so that the are not connected to each other?
05gt 
Silver - Posts: 628
Silver spacespace
Joined: October 30, 2005
Location: British Columbia, Canada
Posted: November 22, 2005 at 5:23 PM / IP Logged  

use a relay

hook uo the ignition wire from the alarm/remote starter to the ignition wire in the vehicle

pin 85 goes to the ignition wire from the remote start/alarm brain

pin 86 goes to the alarm brains ground out when running wire/or (-) status wire

pin 30 goes to the second ignition wire in the car

pin 87 goes 12 volts (constant)

start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: November 22, 2005 at 9:29 PM / IP Logged  
How do you determine what door lock system you have on your car?
start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: November 22, 2005 at 10:02 PM / IP Logged  

Hello, I'm planning to install CRIMESTOPER alarm/ remote start on 2000 Camry with keyless intry option. 

Please give me advise from your experience, this is my first camry...

How to install door lock option, what kinda door lock system does it have what do you do with the child safty wire?

Tech wire...

Factory alarm wire...

OEM Alarm disarm...

Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 23, 2005 at 6:24 AM / IP Logged  
Use blue for unlock and blue for lock, in the drivers kick. They meter from the key cylinder in the door. You don't need relays, direct hookup from the alarm brain. If you have a factory alarm this will arm and disarm it also. For tach use the black wire on the coil....
Mike M2
Tech Manager
CS Dealer Services
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 23, 2005 at 6:28 AM / IP Logged  
Oopps! Brain fart. That's blue/white for lock....
Mike M2
Tech Manager
CS Dealer Services
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 23, 2005 at 8:16 AM / IP Logged  
start25, do a search in the forums prior to beginning this installation as there is an abundance of information on the forums for the Toyota and it will benefit you alot if you just type in " Toyota Camry " in the search button above. You will find most if not all the information that you will need in order to get the RS installed.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: December 06, 2005 at 4:17 PM / IP Logged  

Hi,

I'm planning to intall alarm/starter (crimestoper) on 2001 Camry, Can you tell me what Alarm Input wire on the car is? What wire do you hook up to it?  Also it has child safety wire, what do I do with that, do I have to hook up door lock wires some special way?

Please help!!!!

Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: December 06, 2005 at 4:48 PM / IP Logged  
You use blue for unlock and blue/red for lock, either in the passengers kickpanel or the orange plug at the bottom of the fuse box. There is no child safety wire if you use these wire, test them by turning the key in the p;assenger door...
Mike M2
Tech Manager
CS Dealer Services
start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: December 07, 2005 at 2:12 PM / IP Logged  
Thanks alot, inntalled succesefully!!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer