remote starter, unlock doesn’t work

Home / the12volt's Install Bay / Car Security and Convenience / remote starter, unlock doesn’t work (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

marty slc

Member - Posts: 7

Joined: November 17, 2005

Location: United States

Posted: November 25, 2005 at 1:05 PM / IP Logged

No security so I'll get a 315 to try/

I'll try simulating the onboard relay as mike suggests at the same time. I'll let you guys no how it went. I'll call radio shack to see it they have the 315. Infact I'll get an assortment to try just in case.

Thanks a buch guys! Oh hey redroc stated to get a relay but not sure what to do with it????????????????

- Marty

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 25, 2005 at 1:17 PM / IP Logged

I think he was refering to lock relays, which you apparently already have onboard your remote start.

Mike M2

Tech Manager

CS Dealer Services

marty slc

Member - Posts: 7

Joined: November 17, 2005

Location: United States

Posted: November 25, 2005 at 1:41 PM / IP Logged

Urrggg ! Radio shack doesn't have a 315. I had to order the 820 for the lock function because they didn't have that and now I will have to order some different ones and sit and wait another week. Sheesh!

Is there a way to test the onboard relay to make sure it's working properly other then with a resistor?

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 25, 2005 at 3:36 PM / IP Logged

build one.... try different parallel/series combinations until you have 315-320.... like 2 630's in parallel, or 2 165's in series...etc.

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

marty slc

Member - Posts: 7

Joined: November 17, 2005

Location: United States

Posted: November 26, 2005 at 9:08 PM / IP Logged

Thanks a bunch guys !!!!! I got it to work with a 270. Never did get the parking lights to work even after working on them for 3 hours. Followed everything to a tee but no luck.

But no big deal, not sure I really wanted the function anyway.

Once again thanks!!

Marty

cloneman315

Member - Posts: 24

Joined: November 27, 2005

Location: United States

Posted: November 27, 2005 at 6:49 PM / IP Logged

chyrsler vehicles need u to relay the unlcok wire they will lock without a relay but wont unlock u need to relay it

cloneman315

Member - Posts: 24

Joined: November 27, 2005

Location: United States

Posted: November 27, 2005 at 6:50 PM / IP Logged

u also have to isolate the switch for the lights to work with a relay

marty slc

Member - Posts: 7

Joined: November 17, 2005

Location: United States

Posted: November 29, 2005 at 10:22 AM / IP Logged

I bought a relay and wired it up per the diagram supplied by Bulldog but couldn't get it working. I tested the 270ohm by grounding the one end and touching the wire and it worked great but when I wired in the relay and unit nothing.

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 29, 2005 at 12:33 PM / IP Logged

then it sounds like you have the relay wired wrong or the doorlock output of your unit is pooched.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote starter, unlock doesn’t work

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.