2002 Sentra Cold Start problem

Have you checked if the unit has a diagnostic mode, and if over-rev is the reason for shutdown?

Does anyone know if you can change the Compustar crack time without the Compustar programer? Just by using the LCD remote, I know for a fact that you can change some options but not sure which ones. Anyone know where to get their hands on the programming manual.

I have never use alt sensing on the compustar, i would assume it is there for a reason, maybe that would help with your cold weather problem.  Just a shot in the dark on it.andrew nickle

shouldve adde dthis in last reply! does the antenna  on that thing have the programming button on it? if so you should be able to use it and the manual to change crank time.andrew nickle

I have two questions; One is I found something in the user guide, it tells you to press (I+II)- for 2 sec Programming Menu 1 and (I+III)- for 2 sec Programming Menu 2. Does anyone know where to go from here? The second is; Also on the CM3000M there is Dip switch 1. off=alt, on=tach 2. off=remote start for 15min    on=remote start for 25min If I turn the tach to off on the first switch, what do I connect the yellow/black wire (alt/tach sensing input)?