2004 Mazda 3, carvox alarm/RS

Home / the12volt's Install Bay / Car Security and Convenience / 2004 Mazda 3, carvox alarm/RS (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

felaani

Member - Posts: 12

Joined: October 27, 2005

Location: Canada

Posted: November 27, 2005 at 11:56 PM / IP Logged

First I used the ignition coil. It worked for couplpe of times, but then started cranking. I tried the fuel injector where I have stronger voltage, but it was the same problem.

Thank for your help anyway.

2004 Mazda 3, carvox alarm/RS - Page 2 -- posted image.

Back to Top

maddog01

Member - Posts: 4

Joined: November 18, 2005

Location: Canada

Posted: November 28, 2005 at 2:29 PM / IP Logged

rdlybeck wrote:

The tach wire must be hooked up correctly with this system. Try using a wire from the ignition coil instead. Not GREEN/ stripe. In a previous post there are pics of it. If the system is not getting the tach signal it will continue to crank the starter. I had that problem because it was not hooked up. Then once I hooked it up it fixed the problem. So if that is not the case I'm not sure what is going on, I am still working on trying to get tech support for this system.

if you find ANY kind of tech support on this product please let all of us know how to get in touch wit these people. that would be greatly appreciated by all, i am sure.

doesn't matter how good you are, you should always have an open mind.

Back to Top

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: November 28, 2005 at 5:57 PM / IP Logged

i've put two of these untis in. NEVER AGAIN. they blow. trust me you won't be able to fix it and good luck finding any tech support.

Back to Top

rdlybeck

Copper - Posts: 81

Joined: June 30, 2005

Location: United States

Posted: December 30, 2005 at 9:59 PM / IP Logged

This is the best I have come up with for tech support on Carvox 990 AKA Radiostar King-Eagle

mailto:Email:wangwy@ceiecsz.com.cn

http://www.carvox.net/

http://www.zerotohundred.com/newforums/showthread.php?t=60788

Ryan Lybeck

"Wiring diagrams are nice but still double check with DMM"!

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 Mazda 3, carvox alarm/RS

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.