Compustar CM-3000-V2 starter problem

Home / the12volt's Install Bay / Car Security and Convenience / Compustar CM-3000-V2 starter problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Tinted

Member - Posts: 5

Joined: August 17, 2003

Posted: November 28, 2005 at 10:30 PM / IP Logged

ok its in a 97 huyndai elantra. half the time the starter just doesnt 'start'. the ignition comes on but nothing else happens. then other times it will start to crank but wont fire up the engine and other times it starts just fine.....

can anyone suggest where to look?

Back to Top

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: November 28, 2005 at 11:16 PM / IP Logged

All of your wiring connections concerning the ignition and the starter circuit. Check the starter bypass relay as well.. Sounds like a poor connection issue..

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 29, 2005 at 11:25 AM / IP Logged

If you used connectors then cut them all out and use solder and tape. If you used solder and tape, ensure that there's isn't a cold solder and then move onto the starter disable relay as suggested by metaverse.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Tinted

Member - Posts: 5

Joined: August 17, 2003

Posted: November 30, 2005 at 12:39 AM / IP Logged

how about if the car starts when the engine is warm and wont start on the cold engine?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar CM-3000-V2 starter problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.