2000 silverado, looking for factory arm

Home / the12volt's Install Bay / Car Security and Convenience / 2000 silverado, looking for factory arm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: December 04, 2005 at 12:09 AM / IP Logged

i have found disarm ....i am hoping that someone has found a factory arm wire .....so far the only way that i have found to arm the factory security is the factory keyfab. thanks

Shawn

Where theres is a wire there's a way.

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 04, 2005 at 7:31 AM / IP Logged

I'm pretty sure there is no other way to arm it other than the factory remote....

Mike M2

Tech Manager

CS Dealer Services

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 04, 2005 at 10:38 AM / IP Logged

You can arm the system by grounding the driver's door pin ( TAN at the BCM ) while locking the doors. This will also shut down the RAP system for you. Use the REARM wire to the door trigger and this will work.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

jacqueslacombe

Copper - Posts: 124

Joined: December 04, 2005

Location: Canada

Posted: December 04, 2005 at 2:35 PM / IP Logged

Hi! jeff is right negative trigger the driver door pin and lock the door the system will arm But i dont know what type of remote stater you installe once it's armed and you press again the lock button you might trigger the alarm.

PS.with autostart you won't have that problem.

cocolaboy

Back to Top

Search for other posts by jacqueslacombe

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 silverado, looking for factory arm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.