tach not programmed on Rem Start

Home / the12volt's Install Bay / Car Security and Convenience / tach not programmed on Rem Start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

radioflyer

Copper - Posts: 63

Joined: November 14, 2005

Location: United States

Posted: December 05, 2005 at 10:14 AM / IP Logged

I have a prestiege (audiovox) alarm w/ remote start and the tach got unprogrammed after having the battery disconnected for some time. I tried the instruction manual's procedure for tach re-programming but it did not work. I think the sensor may have been accedentally pulled loose. where can i find this (and how to fix it) on a 1997 silverado pickup?

thanks

you can never have too much of a good thing

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: December 05, 2005 at 5:50 PM / IP Logged

Audiovox usually uses a GREEN/ orange wire for their tach wire. You may have to trace where it goes to see if it is still connected. It may go to the back of the motor towards the ignition system or towards the engine computer on driver's side fender.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tach not programmed on Rem Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.