Airbag Light.

Home / the12volt's Install Bay / General Discussion / Airbag Light. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

99frontierxe

Member - Posts: 4

Joined: October 11, 2002

Location: United States

Posted: December 16, 2002 at 2:47 PM / IP Logged

I have a 99 Nissan Frontier that I am doing a custom fiberglass console on. I had to remove the passenger airbag control switch to accomodate the active x-over that I am installing. Anyway, after plugging back in the switch, the airbag idiot light is blinking. I tried removing the battery overnight, but the airbag light is still on!

Has anyone else experienced this problem, and what did you do to fix it? I just don't want to take it to the dealership to have the ECM Diagnosed... they want 85 bucks for that! Thanks for your help in resolving this matter.

webguy

Copper - Posts: 89

Joined: December 11, 2002

Location: United States

Posted: December 17, 2002 at 5:31 PM / IP Logged

I know there is a way to reset the SRS system, but I am not sure. You might try posting your issue at http://www.infinitihelp.com/Nissan/Index.htm. They have a forum at http://www.infinitihelp.com/Forum.htm

Good Luck!

Clean tools = Clean work!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Airbag Light.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.