02' mitsubishi diamante

Home / the12volt's Install Bay / Car Security and Convenience / 02' mitsubishi diamante (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 04, 2003 at 3:31 PM / IP Logged

There are two other places that you can grab the unlock & lock wires for the 2002 Diamante. You will need to go to the ECM high on the driver's kick panel (-) trigger wires. The colors are:

LOCK : RED
UNLOCK : RED / GREEN

Other than this you will have to go into the driver's door for the wires.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

iskidoo

Silver - Posts: 1,046

Joined: December 08, 2002

Location: Maine, United States

Posted: March 04, 2003 at 5:35 PM / IP Logged

Thanks Jeff, I think I might have messed up the transponder cause its not starting at all now, turn over and turns but no security light. Any info or help on this would be great

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 04, 2003 at 5:44 PM / IP Logged

Try moving the key around & also the ring on the cylinder. Another thing to test is try putting the key in the cylinder but do not turn it over and try to remote start the car. If it does, then you know it's just the placement of the key in the module or the ring placement.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

iskidoo

Silver - Posts: 1,046

Joined: December 08, 2002

Location: Maine, United States

Posted: March 05, 2003 at 1:15 PM / IP Logged

Figured it out. when I swapped the rings I forgot to plug the OEM harness back in. So nothing was starting, not even with the regular key. I thought I had put it into the security shutdown that only the dealer could fix. Then I remembered that I hadn't plugged that harness back in and it started right up after that. Silly mistake but I was a bit worried for a while. Any way if that ever happened that it locked up like that. Is there any way to reset the computer without having to take it to the dealer?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 05, 2003 at 4:16 PM / IP Logged

Try to o'l remove the ground from the battery trick for about 30 minutes. Other than that you probably need the scan tool to remove the error from the CPU.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02' mitsubishi diamante

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.