Wait to start

Home / the12volt's Install Bay / Car Security and Convenience / Wait to start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

d.medic

Member - Posts: 18

Joined: January 26, 2003

Location: United States

Posted: December 15, 2005 at 8:20 PM / IP Logged

I'm installing a RS in a 2004 GMC diesel. I did not hook up the wait to start wire, the vehicle takes less then a sec. to warm the glow plugs. It will not remote start. Does the vehicle have a safety feature that won't let it start tell the light goes out? Also how will the blue wait to start wire meter? I have three in the cluster and can't figure out what one it is because the light turns off so fast.

thanks

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: December 15, 2005 at 9:04 PM / IP Logged

What are you using for ByPASS??

Wait To Start will Show NEGATIVE after Key is turned on & light has timed out

You can also find it at the PCM......

The PCM (Powertrain Control Module) is in the left front of the engine compartment to the left of the fan shroud. The wait to start wire is in the green plug, pin 36........dk. blue

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Craig3708

Copper - Posts: 155

Joined: January 30, 2004

Location: Canada

Posted: December 16, 2005 at 8:10 AM / IP Logged

The wait to start wire, is the Blue wire that is closest to the drivers side in the insturment cluster plug.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wait to start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.