Civic/Compustar FM900-AS

Home / the12volt's Install Bay / Car Security and Convenience / Civic/Compustar FM900-AS (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 18, 2005 at 3:58 PM / IP Logged

I started to sort though the wires and the installer that did my alarm 2 years ago did a terrible job. Just spent 2 hours cutting all the zip-ties and organizing the mess.

This model is manual tranny specific. Do I still need to bypass the clutch?

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 18, 2005 at 4:20 PM / IP Logged

yes

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 18, 2005 at 5:03 PM / IP Logged

I just have to cross the wires on the clutch switch, or do I have to wire it to the alarm. I read that one person hooked it to the blue wire on the one relay, but he said it gave him problems.

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 18, 2005 at 6:06 PM / IP Logged

do it properly and wire in a relay so that the clutch is only bypassed during remote start

use the (-)starter wire of of the alarm brain and wire a relay in

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 18, 2005 at 9:50 PM / IP Logged

Can you give me any advice for this? I never did anything with relays. I am sure I can do it. Where can I get one?

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 18, 2005 at 9:59 PM / IP Logged

Nevermind. I got it figured out. I am going to hook it into the status output wire.

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 19, 2005 at 8:49 PM / IP Logged

Thanks for the help guys. I got it all done and it is working. On my wiring diagram it said the trunk trigger was blue/black in the drivers kick. But I can't find it. Any body know where it is?

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 19, 2005 at 9:04 PM / IP Logged

the blue/black wire is in the same plug where you got your doorpins

it is the green factory alarm plug hiher up in the driver kick panel

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 19, 2005 at 11:34 PM / IP Logged

I'll have to look again. That is where I was looking. Maybe I'm going color blind.

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 24, 2005 at 3:40 PM / IP Logged

I got the trunk trigger hooked up. But now I can't arm the car. It is giving me 3 flashes of the parking lights. When I cut the wire, it works fine though. Any thoughts?

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.