ProStart 5060 will not enter program mode

Hi all, finished installing the 5060 into a '95 Ranger. All wiring has been checked and seems to be correct. When I first tryed to program, it kept going into panic, got the fix from another thread, went into valet, out of valet problem solved. Now when I flash the hood pin, holding it for 4 secs, then releasing, the parking lights come on for 2 secs and go off. Try it again and the same thing. I can't get the module to enter program mode, any ideas?

ok, called the manufacturer, problem solved just a bit of finger trouble. Next problem, I'm trying to get into ready mode, engine running, parke brake set, press lock, get my three flashes, turn the key and it shuts down? any thoughts?

Everything is working, alarm and remote start. In the end turns out it was an intermittant door switch on the drivers door. Switch cleaned and no faults.