Compustar 2WSS-AS start problem

Home / the12volt's Install Bay / Car Security and Convenience / Compustar 2WSS-AS start problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

viptime

Member - Posts: 33

Joined: August 23, 2005

Posted: December 20, 2005 at 7:23 AM / IP Logged

Compustar 2WSS-AS start problem

Finished installing Compustar 2WSS-AS today and it the starter don’t work. I followed http://forums.clubrsx.com/showthread...ruha+compustar instructions.

I cut the jumper wire in side of the main unit to make it work with automatic transmission

Tachometer was learned successfully as indicated by one beep (so some things work Compustar 2WSS-AS start problem -- posted image.

) but it still will not start. (no cranking or any signs of life)

After I push the (II) button for 2 sec to start. Remote beeps 3 times -> car beeps 3 times -> car flashes 2 times and after a few sec. pause it flashes 7 times (indicating Reservation mode OFF) it suppose to be a manual transmission code only and I got 02 RSX Automatic.

Any help is appreciated.

viptime

Member - Posts: 33

Joined: August 23, 2005

Posted: December 20, 2005 at 7:45 AM / IP Logged

This is the Comustar 2WSSR for Acura RSX wiring diagram I followed

http://forums.clubrsx.com/showthread.php?t=172184&highlight=bruha+compustar

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 20, 2005 at 8:13 AM / IP Logged

When you cut the GREEN / WHITE wire inside the CPU did you separate the wires ? Also, make sure you test for residual power on the ignition switch incase the 2 flashes after the 3 beeps was also a indication of your problem.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

viptime

Member - Posts: 33

Joined: August 23, 2005

Posted: December 20, 2005 at 10:17 AM / IP Logged

Thank you Velocity Motors,

I just rechecked all the connections and it checked out 100%. The GREEN / WHITE jumper wire is cut and separated.

Could you please tell me how to check the residual power on ignition switch.

Thank you

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 20, 2005 at 3:31 PM / IP Logged

are you using this unit just for remote start purposes

disconnect the parking brake wire and the doorpin wires from the brain

if you are using this unit for alarm/remote start purposes just disconnect the park brake wire from the brain

this should solve the problem

viptime

Member - Posts: 33

Joined: August 23, 2005

Posted: December 20, 2005 at 5:52 PM / IP Logged

tdisconnected the park brake wire and still no start

viptime

Member - Posts: 33

Joined: August 23, 2005

Posted: December 21, 2005 at 7:45 AM / IP Logged

Anyone, any suggestions?

viptime

Member - Posts: 33

Joined: August 23, 2005

Posted: December 21, 2005 at 10:37 AM / IP Logged

I set the reservation mode and it started up. How go I get this thing to understand that it is automatic. The wires are cut and separated, I don’t know what else to do. Turning key on and off did not work. I also tried taking out power fused and the battery out of the remote to reset the system. There has to be some way to do it.

Thank you for everyone.

tcool

Copper - Posts: 100

Joined: September 06, 2003

Location: United States

Posted: December 22, 2005 at 2:13 AM / IP Logged

The new compustars don't use the jumper inside the unit for automatic transmissions anymore. However, the ones I have don't have the green white wire anymore, and have a big sticker on the dipswitch door that states "Manual" or "Automatic". I would call Ray in tech support at Firstech 888-820-3690 and describe the problem. Maybe they sent out some of the newer dedicated units with the jumper wire. If not, you probably have a defective brain.

bzzzzttttt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar 2WSS-AS start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.