how to wire this system

Home / the12volt's Install Bay / Car Audio / how to wire this system (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

e36325i

Member - Posts: 6

Joined: May 20, 2005

Location: United States

Posted: December 21, 2005 at 1:50 AM / IP Logged

I need some help installing this system as i've never used a six channel amp.

The equipment

basic model jvc deck

alpine type s speakers rated for 40 watts rms (2 sets)

jl audio e6450 six channel amp with these power ratings

Rated Power 12.5 V Stereo: 45W RMS x 6 @ 4 ohm

75W RMS x 6 @ 2 ohm

Rated Power 12.5 V Bridged: 90W RMS x 3 @ 8 ohm

150W RMS x 3 @ 4 ohm

Jl audio 10w0 rated for 125 watt rms ( 4 ohms)

first off the deck only has one set of outputs for rca's so how do i go about running rca's for all six channels on the amp.

second is it possible to use 4 channels in stereo and then bridge channels 5 and 6 for the sub without damaging the amp ?

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: December 21, 2005 at 6:22 AM / IP Logged

1) You can wire line output converters to the speaker outputs to run rca's from the radio to the amp, or you may consider upgrading the deck.

2) Yes, you can do this no problem.

My ex once told me I have a perfect face for radio.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to wire this system

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.