97 monte carlo, Avistart 3200

alright label me n00b of the year, first time doing an 'alarm install' the only function i plan to use on it is the keyless entry, on an AVISTART 3200(until i get the passlock override for the remote starter part), i have all wiring diagrams for the unit however, few questions. what kind of method do the lock switch use? its got 4 wires blue orange white and something else if i remember correctly. other main question, where are you supposed to mount the fuseblock looking ends where you wiring the inputs and outputs? much appreachated if anyone can help, flame me if this is to dumb of a question! my expertise lies elsewhere.97 Monte Carlo

CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

thanks for the info, my haynes manual says the locks flip on a negative pulse, ill have to get a decent digi meter lol97 Monte Carlo

CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

what is type A wire? theres about 4 light blue wires down there only one white97 Monte Carlo

CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

ok i figured out which was which, hooked it up to the fuse looking harness, got the units power and ground hooked up, im trying to program it just for the locks, it just blinks the LED when i push the "arm" button and makes a series of clicking noises when i press the "disarm" button97 Monte Carlo

CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

so you have the systems Lock  & unlock (-) Pulse wires hooked up to a relay to provide a Positive trigger or you just connected them w/out a relay???Taking It 1 Wire @ A Time...

theyre hooked up to a relay to make a positive trigger97 Monte Carlo

CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.

I would just unplug the unit make sure you have a nice clean ground( no paint or rust) and 2x chk lock/unlock wires w/ ur DMM  you should have a 0 then when triggered goes to a positive, chk  the wiring of ur Relay, Taking It 1 Wire @ A Time...

i know its the right wires, i dont have a digimeter so i went with the cut and pray option, i cut the white and the driver door could no longer unlock and went i did the light blue it couldnt lock either, passenger side still works thankfully97 Monte Carlo

CDA-9885, PZI Crunch 5 channel,12in MB Quart Premium.