2003 envoy, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2003 envoy, remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

ryguy

Member - Posts: 44

Joined: November 28, 2005

Location: United States

Posted: December 28, 2005 at 10:00 AM / IP Logged

any one have any info on useing a dei 457g on remote starter on this vehicle . remote starts fine but security light stays on when u start with the key ?? any info would be good.thanks!

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: December 28, 2005 at 12:14 PM / IP Logged

i have a 457G installed on my own 03 Envoy without this issue... no problems at all in fact.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

wiretapper

Copper - Posts: 166

Joined: December 11, 2003

Location: United States

Posted: December 28, 2005 at 4:41 PM / IP Logged

Check the remote start "ground when running" wire and make sure it's not grounded when you use the key.

Either that, or use a relay and the key sense wire to open up the ground trigger to the 457G when you put the key in.

ryguy

Member - Posts: 44

Joined: November 28, 2005

Location: United States

Posted: December 28, 2005 at 6:52 PM / IP Logged

thanks ! I will c what i can do ,thinking it may be a ground problem ill go from there

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: December 28, 2005 at 8:31 PM / IP Logged

Make sure you power the brown acc wire also.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: December 28, 2005 at 10:50 PM / IP Logged

chris354 wrote:

Make sure you power the brown acc wire also.

why??

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: December 28, 2005 at 11:59 PM / IP Logged

Moderator X wrote:

Chris,

In most of the new GM vehicles that we list the brown wire as needing to be powered any or all of the following can/will occur if the brown second acc wire is not triggered.

No crank

SRS light on

No PL read

4wd issues

If you've had success to this date with not powering the brown wire, keep your fingers crossed or whatever you guys are doing to fool the BCM to believing it's seeing a signal it needs

ryguy

Member - Posts: 44

Joined: November 28, 2005

Location: United States

Posted: December 29, 2005 at 9:47 AM / IP Logged

thanks guys for all your help i will find out in about a hour when it comes in and i get under there 2 c

MECP installer,technician

uffdog

Member - Posts: 45

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 01, 2005

Location: United States

Posted: December 29, 2005 at 7:29 PM / IP Logged

Disconnect the battery for 5 minutes and it should take the light out, this happened on my 03 Trailblazer and I disconnected the battery neg and it cured the problem up.

rfd

ryguy

Member - Posts: 44

Joined: November 28, 2005

Location: United States

Posted: December 29, 2005 at 8:36 PM / IP Logged

did it come on only when the key was in use ? remote starts fine no security light use the key only the light come on i guess the truck locked up told them to leave the key on for 5 mins. havent got to c the truck yet but maybe tomarrow

MECP installer,technician

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.