Freedom alarm problem

Home / the12volt's Install Bay / Car Security and Convenience / Freedom alarm problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

DJRr

Member - Posts: 9

Joined: January 23, 2005

Posted: December 28, 2005 at 12:07 PM / IP Logged

Hey guys, I got a problem with my Freedom 500 (Omega Research) alarm. It worked fine for about a year, but now all of a sudden when I disarm it and start the car the alarm will arm itself and starts chirping. I'm not able to disarm it neither with the remote nor with the vallet switch. The exterior lights keep on constant instead of blinking and the only way to shut it off is cutting out power. I tried reprogramming the alarm with no success. All other alarm functions work fine.

Any suggestions??

Thanks in advance!

jacqueslacombe

Copper - Posts: 124

Joined: December 04, 2005

Location: Canada

Posted: December 29, 2005 at 1:14 AM / IP Logged

HI! first Iwould try to disconnect the battery and reconnecting it if no change check your ground or try an other brain

cocolaboy

Search for other posts by jacqueslacombe

DJRr

Member - Posts: 9

Joined: January 23, 2005

Posted: December 29, 2005 at 9:47 AM / IP Logged

Hi.

Yes, I tried disconnecting the battery for a while. I also disabled the ignition module out, since the problem begins only when the car starts, but still no luck. I'm thinking it's the alarm's brain module that has gone bad. What I did was to hook up a switch so I can cut the the alarm's power out before cranking the engine, that's the only solution by now.

DJRr

Member - Posts: 9

Joined: January 23, 2005

Posted: December 29, 2005 at 9:50 AM / IP Logged

Ps: weird thing is that the alarm arms itself while the engine is running. While the ignition switch is in the ON position with engine off it gives no problems though.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Freedom alarm problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.