clifford avantguard 4

Home / the12volt's Install Bay / Car Security and Convenience / clifford avantguard 4 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Bigplc

Member - Posts: 8

Joined: July 06, 2003

Location: United States

Posted: December 30, 2005 at 11:08 AM / IP Logged

who has installed this alarm?

ripley01

Member - Posts: 33

Joined: November 27, 2005

Location: Netherlands

Posted: December 30, 2005 at 1:35 PM / IP Logged

I'm at it. Maybe I can help, what's your issue?

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: December 30, 2005 at 2:11 PM / IP Logged

what you looking to know exactly..

Why oh Why didn't i take the blue pill

Darren Power

Forseti

Copper - Posts: 78

Joined: January 27, 2005

Location: United States

Posted: December 30, 2005 at 4:51 PM / IP Logged

I am installing it right now into my 03 Dakota R/T.. what ya need to know ?

Bigplc

Member - Posts: 8

Joined: July 06, 2003

Location: United States

Posted: December 30, 2005 at 9:36 PM / IP Logged

no problems yet ive had the alarm and im setting up to install it and ive heard theres lots of problems with it. how long have you guys been installing this alarm?

Forseti

Copper - Posts: 78

Joined: January 27, 2005

Location: United States

Posted: December 30, 2005 at 10:22 PM / IP Logged

I have installed baout 10 or so Avantguard 4 units. I have never had a problem with them ....

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: December 30, 2005 at 10:55 PM / IP Logged

cliffords are as good as the installation. I personally own three of them with all the accesories and have two other close friends with them and never see issues, they have been installed for years. I have also installed many others with no major problems. Install it well and you will see what a beautifully complex and reliable alarm it is. One thing though, watch out for the delayed accesory and heat wires from the intellistart on that vehicle. It could cause a check engine light if you put a delay on the BLACK/ orange ignition wire. you need a relay to avoid it. Let me know if you need help.

Bigplc

Member - Posts: 8

Joined: July 06, 2003

Location: United States

Posted: December 31, 2005 at 8:27 PM / IP Logged

how many hours did it take to install

Forseti

Copper - Posts: 78

Joined: January 27, 2005

Location: United States

Posted: December 31, 2005 at 8:38 PM / IP Logged

It depends on the installer.. i like to solder all my connections so it takes a bit longer than crimped connections..... it also depends how easy it is to get to the wires you need.... how far you have to run the harness from the AVG4(where you hid it) to you ignition system its about a 2 days on a real complex system ... about 1 1/4 to 1 1/2 days on a simple truck

Bigplc

Member - Posts: 8

Joined: July 06, 2003

Location: United States

Posted: December 31, 2005 at 8:39 PM / IP Logged

i have a rsx type s manual rookie installer

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.