Lost Power to Amps?

I have a 2005 Tahoe and Alpine E320 EQ, JLAudio 1000/1 amp, and JLAudio 4 channel amp. I disconnected the power under the hood at the fuse to run a new remote wire. I reconnected everything the same way, but when I turn it on now my amps don't come on. The EQ doesn't read any signal and the amps show no power. Any thought on this?

did the fuse blow when you put it back? or are you sure you have the remote wire correct. check all leads with a dmm, and then post what you have found.

the remote would be a blue wire with a white line going down it if you still dont get no power check the fuse on the batt and if thats fine then check the fuse on your distrubution block if you have one and if thats fine or if you dsont have one then check the fuse on the amp itself and if that still doesnt work then dissconnect the remote wire and touch it on the 12 volt power sourse and see if it turns on that way. post on what goes on6 memphis PR 15's sealed enclosure. indash mobile video system. alphasonik HC800PMA 3000 rms

MECP first class installer