the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

f.g. trunk set up for 69 chevelle!


Post ReplyPost New Topic
< Prev Topic Next Topic >
downstarinc 
Copper - Posts: 119
Copper spacespace
Joined: October 22, 2005
Location: United States
Posted: January 14, 2006 at 3:33 AM / IP Logged  
ok i got a whole jl system, from the 1/0 wire to the 4 12 w6v2's...and i have a big ol' mdf ported box that is pretty loud but doesent show off my 3g's+ of equiptment..so imma start my fiberglass box/amp display on sunday..what imma do is make the skeleton(mdf back and bottom bases)...fleece it ...resin it...glass it...and the end will be sanding, bondoing, painting,ect...just want to get some feedback/advice before i start..last f/g project took a month for a rear deck..learned alot since then tho...
f.g. trunk set up for 69 chevelle! -- posted image.
...gonna look something like that...rough rough rough draft..
jl audio..nuff said
_juice_ 
Member - Posts: 10
Member spacespace
Joined: January 10, 2006
Location: United States
Posted: January 14, 2006 at 8:16 AM / IP Logged  
looks good to me
im not sure how it will sound...is it 1,2 or 4 chambers?
im guessing the 3 squares are amps?
how do you plan to mount them with them overlapping each other?
looks like it would be sweet if you build it though...when you start...post some pics of the progress for us
there is no cure for stupidity
ragoal12 
Copper - Posts: 135
Copper spacespace
Joined: July 23, 2005
Location: United States
Posted: January 14, 2006 at 12:28 PM / IP Logged  
what u want looks pretty good... i recommend going to jl's website and looking thru there gallery .. there are some very good FGed projects.. and you can get a ton of ideas from there as well
S.O.B custsoms.. South Omaha, Nebraska
downstarinc 
Copper - Posts: 119
Copper spacespace
Joined: October 22, 2005
Location: United States
Posted: January 24, 2006 at 1:27 AM / IP Logged  
https://i15.photobucket.com/albums/a395/downstarinc/subring.jpg
sub rings finally done..theyre 1 1/2in. thick..next, the skeleton.
jl audio..nuff said
jfunk06 
Copper - Posts: 64
Copper spacespace
Joined: July 18, 2005
Location: United States
Posted: January 29, 2006 at 4:25 PM / IP Logged  
Do you want them to be flush mounted?  I would suggest making a bigger ring, so you can sink the sub into it, well, atleast i think it looks better anyway. 
Govenor of Jimcinati
93' GMC Safari XT
downstarinc 
Copper - Posts: 119
Copper spacespace
Joined: October 22, 2005
Location: United States
Posted: January 31, 2006 at 8:54 PM / IP Logged  
flush mounted will take up more room tho...
jl audio..nuff said

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer