Valet 562, 2002 Honda CRV

Home / the12volt's Install Bay / Car Security and Convenience / Valet 562, 2002 Honda CRV (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

philsan12

Member - Posts: 20

Joined: December 08, 2005

Location: United States

Posted: January 15, 2006 at 10:24 AM / IP Logged

Honda 2002 CRV

This input comes from factory set to 2 activation pulses.

Where does this connect? - install manual shows switch to ground.

Also does the 2 wire Unlock- and lock-from the module go to the car power lock/unlock w/b, w/g wires or the Lock motor wires.

phil

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: January 15, 2006 at 10:58 AM / IP Logged

you could hook the wire to a wire that shows neg pulses with the lock on the factory remote and press the factory remote lock two times and the car will start

philsan12

Member - Posts: 20

Joined: December 08, 2005

Location: United States

Posted: January 22, 2006 at 9:18 PM / IP Logged

Honda CRV 2002

Like to have the remote Start activate the rear defogger.The remote start harness H3/5 supplies (-) 200ma output.It can be used to activate the defog trigger seconds after the remote start.Any idea where a trigger wire is and do I need a relay?I figure it can't be a simple as tapping in to the switch wire or is it?

Thaks

phil

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 23, 2006 at 9:36 AM / IP Logged

Yellow/black at the switch harness NEG(-) trigger. Use a relay to be safe!

philsan12

Member - Posts: 20

Joined: December 08, 2005

Location: United States

Posted: February 04, 2006 at 10:53 PM / IP Logged

Thanks BUT?

I take off the 3 dial control panel. Green switch wire assembly behind. About 25 wires. Taped into the yellow black. If I use a DMM no voltage but if I switch on 12+.

If I've got the right wire and I connect the module via relay does nothing?

??? We talking connector right behind the hvac panel?

phil

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Valet 562, 2002 Honda CRV

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.