2000 Chevy Silverado alarm/remote start

Does any one have the paper work for a Chevy Silverado and please let me know if it needs a Bypass...Thanx in advance..Confidence is the key to any project!!

Have you used the Search feature?

One of the easiest installs you'll ever do.  Everything you need is at the BCM under the column other than IGN wiring which is just above the BCM exiting the column.  And yes you need a bypass for Passlock 2 and there's a hundred different ones you can use.  My personal preference is a PLJX and is made by BYPASSKITS.COM.  Very reliable and easy to install.  TechHead

PLJX or GMBP....Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Come  on..................Haven't you guys used the IB-01??  Does PassLock, Driver Door, Door Locks, etc. ....more than the PLJXMO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

and it does this on the pre-2003  vehicles? (since this thread is about a 2000 Silverado).... how does it do this on non-class II vehicles? Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

I Installed an alarm to a  2000 chevy silverado and now the service engine light turned on and the transmission is acting up. Does anyone know why the light and the trans would start to act up or does anyone know where the computer for the transmission is .  Thanx in advance.Confidence is the key to any project!!

where did u tie in for the door trigger? need to know where u tag the wires in the truck before we can help.Where theres is a wire there's a way.

The door triggers I connected from the BCM used tan for driver, orange for passenger.  The tach installed at the ECM.  Also power locks from BCM.  I also installed the factory alarm disarm from the BCM.Confidence is the key to any project!!