Clear topcoat

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Clear topcoat (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jlord16

Silver - Posts: 322

Joined: September 08, 2005

Location: Australia

Posted: January 23, 2006 at 10:20 PM / IP Logged

Alrighty i bought some clear acrylic laquer to go over some airbrush work that i have done. I dont usually use clear topcoats but when i sprayed it on with my gravity gun, it went on as a white mist. the product is crystal clear in the can but wen applied it turns to a mist white as its leaving the gun, can any1 tell me whats going on?

Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

Back to Top

placid warrior

Silver - Posts: 357

Joined: November 06, 2004

Location: Canada

Posted: January 23, 2006 at 11:58 PM / IP Logged

How long ago did u spray it, some clear topcoats are a sorta filmy white when u spray em but become clear when cured...if u havent waited for it to dry yet, wait untill then to see if it clears up, if its dry and still hazy/white then is it possible u had some white paint that wasnt cleaned from the gun properly?.

Back to Top

Search for other posts by placid warrior

jlord16

Silver - Posts: 322

Joined: September 08, 2005

Location: Australia

Posted: January 24, 2006 at 3:12 AM / IP Logged

Turns out the laquer wasnt thinned enough and the pressure was 2 high, causing the clear coat to dry as it hit the surface. so ive taken back the shhhty coat with wet n dry, and redone it properly

Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clear topcoat

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.