i pod to kenwood krc-4028?

Home / the12volt's Install Bay / General Discussion / i pod to kenwood krc-4028? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

96bigdogg

Member - Posts: 8

Joined: January 25, 2006

Location: United States

Posted: January 25, 2006 at 6:41 PM / IP Logged

whats the easiest way to hook up an i pod to my kenwood krc-4028 i pod to kenwood krc-4028? -- posted image.

hard hittin big dogg

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 25, 2006 at 8:48 PM / IP Logged

If its a changer controller use Peripheral part # PXDPA 129.95, with harness PXHKN1 19.95

Back to Top

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: January 25, 2006 at 11:15 PM / IP Logged

You could but the IP500 ipod inteface from Kenwood, plug it into the change input, plug in the Ipod, put in the glove compartment and control it from the deck. Or, by the aux in adaprter plug in the Ipod, turn on aux and control through the Ipod.

Back to Top

nstaller36695

Copper - Posts: 106

Joined: January 20, 2006

Location: United States

Posted: January 26, 2006 at 8:37 PM / IP Logged

if it does have the cd changer port use the kenwood ipod interface for sure u can actually run the wire to the glove box and control the ipod from the deck its the best way to go it cost about $ 100 but trust me not having an ipod hanging from the dash is nice.

the best part of a job is seeing the bumper get smaller over the horizon

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

i pod to kenwood krc-4028?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.