Modding Avic-N1/N2 Nav DVD’s

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation - Hot Topics / Modding Avic-N1/N2 Nav DVD’s (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

braddman

Member - Posts: 27

Joined: March 23, 2006

Location: United States

Posted: March 24, 2006 at 4:50 PM / IP Logged

Mines been open for a day and a half. People were leeching from me but now it's at 99.93 percent and it says no one is downloading from me...wtf.

braddman

Member - Posts: 27

Joined: March 23, 2006

Location: United States

Posted: March 24, 2006 at 4:54 PM / IP Logged

Well guys I'll leave mine open till further notice but I'm stuck at 99.93 percent and it says status pending. I need the rest so I can seed.

Datwo

Member - Posts: 48

Joined: February 01, 2005

Posted: March 24, 2006 at 5:22 PM / IP Logged

braddman, is your IP 24.179.206.xx ? Cuz if so, you are unconnectable from me... try restarting.

Cali_pilot

Copper - Posts: 73

Joined: April 11, 2005

Location: Virginia, United States

Posted: March 24, 2006 at 5:38 PM / IP Logged

I'm currently at 80% so I'll be seeding it soon. According to my current download speeds I'll be done in less than 5 hours. I'm getting most of my speeds (about 30 kB/s) from 71.34.75.XX. Thanks, whoever you are! I'll seed it as long as people need it and I've got a 256 kB/s upload so it should speed up quite a bit.

2011 Ford F-150 Super-Crew FX4

HU: Pioneer AVIC-Z1

Fronts: Infinity Kappa 682.9cf

Rears: Infinity Kappa 682.9cf

Amp: Profile AP1040

Sub: Pioneer TS-SWX251

Datwo

Member - Posts: 48

Joined: February 01, 2005

Posted: March 24, 2006 at 6:16 PM / IP Logged

Cali_pilot wrote:

Modding Avic-N1/N2 Nav DVD’s - Page 30 -- posted image.

sush1a

Member - Posts: 17

Joined: August 01, 2004

Location: United States

Posted: March 24, 2006 at 6:28 PM / IP Logged

i don't know if i'm seeding or not, but you just leave it on after it's done right? it's done for over a day now.

braddman

Member - Posts: 27

Joined: March 23, 2006

Location: United States

Posted: March 24, 2006 at 6:53 PM / IP Logged

Well, my download was hosed. It would never resume, and no one was leeching from me, so I had to start completely over. This blows.

ron_s

Member - Posts: 5

Joined: February 14, 2006

Location: United States

Posted: March 24, 2006 at 7:39 PM / IP Logged

I completed my download and burning DVD now. I checked "seed indef." but it shows "share ratio 101%" and seems to be no activity. What can I do? I have plenty of upload bandwidth with my cable modem. I just do not know what I'm doing, since I'm new with Torrent......

Ron

explor202

Member - Posts: 49

Joined: December 26, 2003

Location: United States

Posted: March 24, 2006 at 7:43 PM / IP Logged

A share ratio of 101% means you have uploaded to others roughly the same amount that you downloaded from the peer(s). Ideally, everyone should seed any torrent to at least a ratio of 200%, or a 2:1 ratio. I just finished my d/l (yes, even though I bought the discs) and am at an 85% ratio, which means I need to seed for a while more. Looking at the swarm, I am seeding to 5 out of 6 leechers.

A.S.E.certified: Steering/Suspension, Brakes, Engine Performance, Engine Repair, Customer Service.

ron_s

Member - Posts: 5

Joined: February 14, 2006

Location: United States

Posted: March 24, 2006 at 8:12 PM / IP Logged

My question is... how do I make it reseed? It seems to have stopped at 101% and there is no more activity. It has remained at 101% for at least an hour and I have "seed indefinately" checked. I will reseed as long as anyone still need it, if I can figure out how. I have maximum bandwidth that Cox Cable has to offer and willing to use.

Ron

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.