paslock interface

Home / the12volt's Install Bay / Car Security and Convenience / paslock interface (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wlfgnggtr

Member - Posts: 3

Joined: April 05, 2005

Location: United States

Posted: January 26, 2006 at 8:10 AM / IP Logged

Does anyone know the proper procedure for interfacing the gm paslock when installing a remote start on a 99 Pontiac Grand Am?

Back to Top

tjdurham

Copper - Posts: 180

Joined: July 25, 2003

Location: United States

Posted: January 26, 2006 at 8:42 AM / IP Logged

what kind of bypass do you have ?

the best one for this car is DEI555L you have to take the radio out to access the ignition switch wires

tj

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 26, 2006 at 9:36 AM / IP Logged

There are about 6 different modules & 3 different methods for bypassing the Passlock II system on the Grand Am. The easiest way is to purchase a bypass module that will interface and bypass the system without the use of relays and resistors. They will range in price between $ 20 - $ 50 depending on the place that you purchase from.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

wlfgnggtr

Member - Posts: 3

Joined: April 05, 2005

Location: United States

Posted: January 26, 2006 at 6:52 PM / IP Logged

Thanks for the help. The DEI 555L is what I was thinking about, that was what was recomended in the manual with the remote start. Thanks again...

Todd

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

paslock interface

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.