the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

prestige alarm, add remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
mikedog12 
Member - Posts: 27
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: January 28, 2006 at 11:19 PM / IP Logged  

i have a prestige alarm and i want to add a remote starter i would i do that.

michael12
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 29, 2006 at 9:32 AM / IP Logged  
Do you know if the Prestige alarm system has a wire on the harness that will allow you to disarm the system or impact sensor prior to remote start ? If it does not then you will need to interrupt the IGN wire or impact sensor on the alarm system so you don't trigger the system into full alarm when remote starting. Also, what remote start are you trying to install.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: January 29, 2006 at 11:53 AM / IP Logged  
You may want to replace the Prestige alarm with an all in one alarm/remote starter unit. You can simply use all the alarm wiring and hook it into the newer unit. If you don't you will either have to use two remotes (one for each system) and use relays to interface the two or use a free channel on the alarm to activate the remote starter. Unfortunately, the alarm's transmitter range usually isn't all that good when this is done. If you opt for this method, you need relays to open the ignition and shock sensot triggers to the alarm while under remote start.
sparky
mikedog12 
Member - Posts: 27
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: January 30, 2006 at 7:55 PM / IP Logged  
yes it has that wire for the remote starter
michael12
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: January 30, 2006 at 11:12 PM / IP Logged  
It's a lot less of a hassle in the long run to pull the thing out and start fresh with a combo unit, and the difference in cost is pretty small.
Look around at the pricing----you'll pay around $30-40 more for an alarm/start combo, than just a remore starter.
mikedog12 
Member - Posts: 27
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: January 30, 2006 at 11:20 PM / IP Logged  
what are you saying chris
michael12
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: January 31, 2006 at 7:21 PM / IP Logged  
I'm suggesting that you buy ONE unit that is an alarm and a remote starter all in one......remove what you have, and give it to a friend, put it in another car, get a couple bucks for it on eBay or whatever.
If you want to add a remote start to the alarm you have...........first, you're looking at extra wiring just to keep the alarm from going off when the remote start kicks in.
Also, you'll have either two separate remotes to carry around, or you can do the remote start using the remote you have now....... but the range is very poor.
If you look on eBay, for example, at Audiovox/Prestige product........ a remote starter will cost you around $70, or an alarm/starter around $100. (That's assuming you have the ability to install it yourself.)
mikedog12 
Member - Posts: 27
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: January 31, 2006 at 11:05 PM / IP Logged  
but my system is setting up to add one on i have a opt on my remote
michael12
kohara73 
Copper - Posts: 192
Copper spacespace
Joined: December 08, 2005
Location: Canada
Posted: February 01, 2006 at 10:35 AM / IP Logged  

What model of Prestige alrm is it?

Keith
mikedog12 
Member - Posts: 27
Member spacespace
Joined: January 28, 2006
Location: United States
Posted: February 01, 2006 at 9:59 PM / IP Logged  
aps-155ch the one thats has the opt on it.
michael12
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer