the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Lancer FIberglass Enclosure


Post ReplyPost New Topic
< Prev Topic Next Topic >
crazy4ozs 
Member - Posts: 3
Member spacespace
Joined: February 01, 2006
Location: United States
Posted: February 01, 2006 at 9:40 PM / IP Logged  

hey guys this is my first post on this forum...im actualyl from caraudio.com...but id thouht id hit u guys up adn share the wealth ova here as well :)...here is my fiberglass box progress pics...enjoy, mor ewill be getting put up shortly, tell me what u think :-D

[IMG]https://i7.photobucket.com/albums/y295/zharbison/DSCN0264.jpg[/IMG]

heres my amp JL 500/1

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0828.jpg[/IMG]

the box all taped off wtih the sub in place (type r 12")

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0864.jpg[/IMG]

fist coat of resin down...

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0871.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0869.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/before1.jpg[/IMG]

MDF base laid down with all the fiberglass trimming down

[IMG]https://i7.photobucket.com/albums/y295/zharbison/after1.jpg[/IMG]

6 more coats of mat and resin later...

[IMG]https://i7.photobucket.com/albums/y295/zharbison/after3.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/assembly1.jpg[/IMG]

all the rings in place, the port is on the right, the mitsu emblem will be light up in red through the plexi with LED's

[IMG]https://i7.photobucket.com/albums/y295/zharbison/assembly3.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/logo2.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/logo4.jpg[/IMG]

thats it for now!!! have mroe up soon! tlel me what yall think!!!!! :) :) :)

mustangfoo 
Silver - Posts: 371
Silver spacespace
Joined: November 16, 2005
Location: United States
Posted: February 01, 2006 at 10:02 PM / IP Logged  
LOOKING VERY GOOD !!!! nice job my friend. . . I like the Logo Idea pretty bad @$$ right there.  keep working on it and keep the progress pics comin!!!
juniorxs 
Member - Posts: 26
Member spacespace
Joined: February 23, 2004
Location: United Kingdom
Posted: February 02, 2006 at 11:54 AM / IP Logged  
ilike the mitsubishi logo how did you cut it out, i was going to do the same thing with the router but the corners would have been rounded
HottAccord 
Silver - Posts: 247
Silver spacespace
Joined: August 12, 2004
Location: United States
Posted: February 02, 2006 at 7:53 PM / IP Logged  
Let me repost these for you, Im too lazy to copy and paste each one into my browser. I think you just needed to make the "-----------------------------------------
Lancer FIberglass Enclosure -- posted image.
heres my amp JL 500/1
Lancer FIberglass Enclosure -- posted image.
the box all taped off wtih the sub in place (type r 12")
Lancer FIberglass Enclosure -- posted image.
fist coat of resin down...
Lancer FIberglass Enclosure -- posted image.
Lancer FIberglass Enclosure -- posted image.
Lancer FIberglass Enclosure -- posted image.
MDF base laid down with all the fiberglass trimming down
Lancer FIberglass Enclosure -- posted image.
6 more coats of mat and resin later...
Lancer FIberglass Enclosure -- posted image.
Lancer FIberglass Enclosure -- posted image.
all the rings in place, the port is on the right, the mitsu emblem will be light up in red through the plexi with LED's
Lancer FIberglass Enclosure -- posted image.
Lancer FIberglass Enclosure -- posted image.
Lancer FIberglass Enclosure -- posted image.
thats it for now!!! have mroe up soon! tlel me what yall think!!!!! :) :) :)
Im a fiberglass whore!!
Cougar.Modder 
Copper - Posts: 78
Copper spacespace
Joined: July 14, 2005
Location: Canada
Posted: February 03, 2006 at 3:24 AM / IP Logged  
Very nice work here so far. Like the emblem idea as well. Will look sick I am sure. Just make sure the plexi is sealed and TIGHT so you get no rattles. That would really suck ass after all the hard work. Can't wait to see the finish product.
Alpine 7830 HU-4X100 W McIntosh -2X110 W McIntosh-MB Quart Q's Mid Tweets-4X10" Phoenix Gold Subs-Phoenix Gold EQ215ix-AC Epi-PG Line Driver-Phoenix Gold 1 Farad Cap -Clifford Avantguard 4-2 Ear Plugs
jlord16 
Silver - Posts: 322
Silver spacespace
Joined: September 08, 2005
Location: Australia
Posted: February 03, 2006 at 9:37 PM / IP Logged  
Looking good so far, i too like the logo idea, shuld look sweet as
Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*
darthness 
Copper - Posts: 136
Copper spacespace
Joined: December 12, 2004
Posted: February 03, 2006 at 11:18 PM / IP Logged  
sweet... can't wait to see this one done.
crazy4ozs 
Member - Posts: 3
Member spacespace
Joined: February 01, 2006
Location: United States
Posted: February 03, 2006 at 11:55 PM / IP Logged  

MORE PICS GUYS!!! this is the sub and port finally positioned in my car...as u can see, not a whole lot of head clearnece from the sub ring ;)...the sub will be inverted once installed and teh metal brances will be removed

Lancer FIberglass Enclosure -- posted image.

Lancer FIberglass Enclosure -- posted image.

Lancer FIberglass Enclosure -- posted image.

Lancer FIberglass Enclosure -- posted image.

Lancer FIberglass Enclosure -- posted image.

H-a performance 
Member - Posts: 6
Member spacespace
Joined: January 04, 2005
Location: Canada
Posted: February 04, 2006 at 11:58 AM / IP Logged  

i hope you plan on reinforcing your rings before you wrap it, because i dont think your straping is going to be ridgid enough when you

stretch and get all the wrinkles out. i could be wrong, but just my experience you dont want those things moving when the glass is curing 

crazy4ozs 
Member - Posts: 3
Member spacespace
Joined: February 01, 2006
Location: United States
Posted: February 04, 2006 at 4:11 PM / IP Logged  
i do  teh metal is only there for temp support theyll b peplaced by wodden rods later, the only reason i did that was because u can change the shape adn posisiton of those much better than u can with wood ;)

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer