99 GMC Suburban, alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 99 GMC Suburban, alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

englishfroggie

Member - Posts: 6

Joined: January 25, 2006

Location: United States

Posted: February 01, 2006 at 11:19 PM / IP Logged

I have a 99 GMC suburban and I am trying to install an alarm with remote start.

I have founs loads of information on this forum and it has been great however... Where do I find the ignition harness to wire it all up to. I have laid on my back in the drivers footwell and looked up and oh my god there are so many wires. Which is the ignision harness?

Also anyone got any ideas on installing and bypass (555L)

Thanks for all your help

Back to Top

Search for other posts by englishfroggie

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: February 01, 2006 at 11:35 PM / IP Logged

from your post, i would suggest taking your truck to a pro, or studing your basics a little more.

gcorrea

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: February 01, 2006 at 11:59 PM / IP Logged

I'm with gcorrea, from what your post sounded like I would get it done professionally, just my 2 cents

Back to Top

stonecole

Copper - Posts: 50

Joined: October 30, 2005

Location: United States

Posted: February 02, 2006 at 12:08 AM / IP Logged

I have a 98 Expedition. And there's part of the dash that goes around the bottom of the steering wheel, at least that's how mine was. Just trying to give you an idea. I say the only way to learn is to try. Just be very careful of what you're doing. Then if it feels overwhelming to you seek professional installation.

Back to Top

englishfroggie

Member - Posts: 6

Joined: January 25, 2006

Location: United States

Posted: February 02, 2006 at 12:14 AM / IP Logged

Thanks Stonecole that's exactly what I thought. If I can change a transmission, re-build an engine, I'm sure I can attempt the alarm. As soon as I find it I'm on my way. Hope you have a great night, I'll remove it and tomorrow and see what I see 99 GMC Suburban, alarm/remote start -- posted image.

99 GMC Suburban, alarm/remote start -- posted image.

Back to Top

stonecole

Copper - Posts: 50

Joined: October 30, 2005

Location: United States

Posted: February 02, 2006 at 12:17 AM / IP Logged

No problem. I just completed an install on my Expedition a 791xv viper. It was my first, finished yesterday finally. Have a good night.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 GMC Suburban, alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.