Rockford Fosgate 900 watt 4 channel

Home / the12volt's Install Bay / Car Audio / Rockford Fosgate 900 watt 4 channel (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Rkodis

Copper - Posts: 54

Joined: December 01, 2004

Posted: February 03, 2006 at 8:25 PM / IP Logged

I need help figuring out how to wire the subs to the fosgate 900 watt amp.

it has 4 channel. I have 2 subs SVC. I believe they are 4 ohm impedance.

Back to Top

jlord16

Silver - Posts: 322

Joined: September 08, 2005

Location: Australia

Posted: February 03, 2006 at 9:10 PM / IP Logged

if they are four ohm then you can simply bridge channel 1 and 2 to one sub and then channel 3 and 4 to one sub

Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

Back to Top

Rkodis

Copper - Posts: 54

Joined: December 01, 2004

Posted: February 04, 2006 at 5:04 PM / IP Logged

I have tried, but for some reason there is no sound coming from the opposite sub,

both subs work, all channels. work

Im only using one pair of rca's could that be the problem?

Back to Top

Rkodis

Copper - Posts: 54

Joined: December 01, 2004

Posted: February 04, 2006 at 5:04 PM / IP Logged

I have tried, but for some reason there is no sound coming from the opposite sub,

both subs work, all channels. work

Im only using one pair of rca's could that be the problem?

Back to Top

ddsubman

Copper - Posts: 70

Joined: December 05, 2005

Location: United States

Posted: February 04, 2006 at 7:15 PM / IP Logged

Yes. Hook up all rca inputs on amp. If you only have access to one pair of rca cables at amp, buy a splitter and that should solve your problem.

Gettin' deafer by the day.......96' GMC yukon-Eclipse CD 5442HU

MA Audio HK4000D-Digital Designs 9515F

150+db with one woofer...DD rules!!!!

Back to Top

Rkodis

Copper - Posts: 54

Joined: December 01, 2004

Posted: February 05, 2006 at 9:17 PM / IP Logged

I have a subwoofer output on the deck, which i used to hook up into the amp. so what is it that i need to do?

Back to Top

Rkodis

Copper - Posts: 54

Joined: December 01, 2004

Posted: February 05, 2006 at 9:18 PM / IP Logged

I mean i have one pair of subwoofer RCA output, which i used to run it to the amp. NOw how do i wire up the speakers to the amp

so they all bump?

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: February 06, 2006 at 3:18 AM / IP Logged

Go buy 2 sets of RCA splitter cables that have two male ends and one female end. Plug the males into the amp so it turns your 4 rca inputs into two then plug in your sub out cables from the deck and you are good to go.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rockford Fosgate 900 watt 4 channel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.