the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

AVH-p7500 sub


Post ReplyPost New Topic
< Prev Topic Next Topic >
stylinz 
Member - Posts: 4
Member spacespace
Joined: February 05, 2006
Location: United States
Posted: February 05, 2006 at 4:05 AM / IP Logged  

So i got one of these off ebay and got it all hooked up.  Pretty nice :)  Anyway i'm hooking up a sub in my car and notice that there is only one RCA output for the sub.  Out of all the radio's and amps i've messed with i've never seen one with just one sub output.  i've seen it on some home stereo's where you do a powered sub but that's about it.  So do i just plug one wire in to that plug and one into the amp.  Do i get an adapter that will change one rca into two or what? 

Thanks,

Christo

whtcrxghst 
Copper - Posts: 210
Copper spacespace
Joined: August 05, 2005
Posted: February 05, 2006 at 2:12 PM / IP Logged  

It should have a red and a while RCA output for a sub.  It comes out the little pigtail seperate from the other harness.  Looks like this

http://parts.pioneerelectronics.com/part.asp?productNum=CDE7444

stylinz 
Member - Posts: 4
Member spacespace
Joined: February 05, 2006
Location: United States
Posted: February 05, 2006 at 3:01 PM / IP Logged  

yeah that's the pigtail.  But it's two for front, two for rear, one for center, and one for sub

sk8ingsmurf 
Copper - Posts: 198
Copper spacespace
Joined: March 18, 2004
Location: United States
Posted: February 05, 2006 at 3:14 PM / IP Logged  
If it does in fact only have one ouptut for the sub just get a y-adapter, subs are going to be mono anyway so it really doesnt need a designated left and right channel.
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: February 05, 2006 at 3:51 PM / IP Logged  
It has a built in surround sound processor so it should only have one sub output RCA. Just use a y cable to feed both inputs on the amp and your laughing.
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, November 30, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer