door relays, 93 dodge intrepid==asap

hey, i havea  VIPER 500 ESP alarm, and have that all installed, but cannot get teh keyless entry feature to work, --- HOW DO I WIRE IT UP? i know i will have to get relays, 30A, 12V right? standard ones, and i also have a wiring diagram already- how do i wire up the relays to lock/unlock the doors?

p.s.     if possible could somebody include a schematic of the relay, showing for each post what wire is attached, thanks a ton!

Try this and if it works properly you will not need relays. Relays are only needed if the alarm does not have alternating polarity lock wires.

i need a relay, can you give me that info too please?

http://www.velocitymotorsport.com/install_notes/Converting_Outputs.jpg

Use the NEGATIVE INPUT ---------------->POSITIVE OUTPUT diagram and make sure that you use the (-) trigger wire on the H2 plug to engage the relays with this diagram.

You can use the (+) trigger to postive output from the previous post as well, doesn't matter.